Kenwood Chef A701A Power Cable Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 minutes            

Sections

1

• Power Cable
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackKenwood Chef A701A

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Remove Cable Grips               

• Turn the mixer upside down
• Remove the two screws holding the white cable grip.
• Remove the black cable grip. The long screw also holds the cover onto the terminal block

Turn the mixer upside down

Remove the two screws holding the white cable grip.

Remove the black cable grip. The long screw also holds the cover onto the terminal block

1024

Step 2

              Remove the old cable               

• Remove the cable cover to expose the terminal block.
• Remove the wires from the live and neutral terminals.
• Thread the cables out though the cover and then from the mixer chassis

Remove the cable cover to expose the terminal block.

Remove the wires from the live and neutral terminals.

Thread the cables out though the cover and then from the mixer chassis

Step 3

              Refit & Reassemble               

• To refit simply follow the removal process in reverse
• Be sure to connect the wires to the correct terminals, Brown - Live, Blue, Neutral.
• If fitting a new plug ensure it is fitted with the appropriate fuse. If in any doubt consult a compitent electrician/electrical engineer

To refit simply follow the removal process in reverse

Be sure to connect the wires to the correct terminals, Brown - Live, Blue, Neutral.

If fitting a new plug ensure it is fitted with the appropriate fuse. If in any doubt consult a compitent electrician/electrical engineer

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                    Grant                     

Member since: 09/29/2015

113 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Karen Leach - May 2, 2020

Reply

Important addition: make sure you leave enough cable length free under the mixer for when you raise the top of the mixer during use to change accessories or remove the bowl. Our local electrical repair shop didn’t think to do this and as soon as I raised the top the cable was pulled out.