Kensington Hi Fi Headphones 33137 Speaker Ear Pad Repair Guide

Difficulty

Easy

Steps

Time Required

                          7 minutes

Sections

Speaker Cover
3 steps
Speaker Ear-Pad
1 step

Flags

BackKensington Hi-Fi Headphones 33137
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Speaker Cover

Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.
Do not pull out the speaker clamp with too much force, or it may break.
After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.

Do not pull out the speaker clamp with too much force, or it may break.

After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

1024

Step 2

Repeat the process in Step 1 to remove the right speaker clamp.

Repeat the process in Step 1 to remove the right speaker clamp.

Step 3

Hold the speaker cover in one hand and the speaker ear-padding in the other.
Turn the speaker cover counter-clockwise until it stops turning.
Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.
Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.
If the speaker cover and ear-padding don’t easily come apart, then make sure the speaker cover is fully turned.
Repeat this process for both speakers.

Hold the speaker cover in one hand and the speaker ear-padding in the other.

Turn the speaker cover counter-clockwise until it stops turning.

Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.

Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.

If the speaker cover and ear-padding don’t easily come apart, then make sure the speaker cover is fully turned.

Repeat this process for both speakers.

Step 4

              Speaker Ear-Pad

After the speaker cover has been removed, hold the edge of the speaker ear-pad with fingers.
Gently pull the edge of the speaker ear-pad around the edge of the speaker.
To avoid tearing the speaker ear-pad, don’t use too much force when pulling it around the edge of the speaker.
Repeat this process for the other speaker ear-padding.

After the speaker cover has been removed, hold the edge of the speaker ear-pad with fingers.

Gently pull the edge of the speaker ear-pad around the edge of the speaker.

To avoid tearing the speaker ear-pad, don’t use too much force when pulling it around the edge of the speaker.

Repeat this process for the other speaker ear-padding.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    William Sanders

Member since: 03/26/2014

573 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Clemson, Team 1-3, Benson Spring 2014                        

                                                  Member of Clemson, Team 1-3, Benson Spring 2014 



                    CLEM-BENSON-S14S1G3                     


                                            3 Members                     


                                            18 Guides authored

Introduction#

#

#

#

#

#

#

Team#

#

Introduction

Team