Kensington Hi Fi Headphones 33137 Speaker Cable Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 minutes            

Sections

3

• Speaker Cover
• 3 steps
• Speakers
• 1 step
• Speaker Cable
• 2 steps

Flags

0

• BackKensington Hi-Fi Headphones 33137

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speaker Cover               

• Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.
• Do not pull out the speaker clamp with too much force, or it may break.
• After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.

Do not pull out the speaker clamp with too much force, or it may break.

After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

1024

Step 2

• Repeat the process in Step 1 to remove the right speaker clamp.

Repeat the process in Step 1 to remove the right speaker clamp.

Step 3

• Hold the speaker cover in one hand and the speaker ear-padding in the other.
• Turn the speaker cover counter-clockwise until it stops turning.
• Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.
• Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.
• If the speaker cover and ear-padding don’t easily come apart, then make sure the speaker cover is fully turned.
• Repeat this process for both speakers.

Hold the speaker cover in one hand and the speaker ear-padding in the other.

Turn the speaker cover counter-clockwise until it stops turning.

Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.

Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.

If the speaker cover and ear-padding don’t easily come apart, then make sure the speaker cover is fully turned.

Repeat this process for both speakers.

Step 4

              Speakers               

• With the internal speaker component exposed, the wires connecting the speakers to the speaker cable can be cut.
• Reassembly after cutting the speaker cable wires will require soldering. Proceed with caution. See Kensington Hi-Fi Headphones 33137 Speaker Cable Replacement.
• Cut each of the wires connecting the speaker to the speaker cable.
• Repeat this process for each speaker.

With the internal speaker component exposed, the wires connecting the speakers to the speaker cable can be cut.

Reassembly after cutting the speaker cable wires will require soldering. Proceed with caution. See Kensington Hi-Fi Headphones 33137 Speaker Cable Replacement.

Cut each of the wires connecting the speaker to the speaker cable.

Repeat this process for each speaker.

Step 5

              Speaker Cable               

• After cutting the wires, untie the knot that is in the speaker cable.
• Repeat this process for each side of the speaker cable.

After cutting the wires, untie the knot that is in the speaker cable.

Repeat this process for each side of the speaker cable.

Step 6

• Pull the speaker cable through the hole in the speaker cover.
• Repeat this process for each side of the speaker cable to completely remove the speaker cable from all headphone components.

Pull the speaker cable through the hole in the speaker cover.

Repeat this process for each side of the speaker cable to completely remove the speaker cable from all headphone components.

To reassemble your device, follow the instructions in the Kensington Hi-Fi Headphones 33137 Speaker Cable Replacement.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    William Sanders                     

Member since: 03/26/2014

573 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Clemson, Team 1-3, Benson Spring 2014                        

                                                  Member of Clemson, Team 1-3, Benson Spring 2014 



                    CLEM-BENSON-S14S1G3                     


                                            3 Members                     


                                            18 Guides authored