Difficulty
Moderate
Steps
10
Time Required
30 minutes - 1 hour
Sections
1
- Drive Motor Coupling
- 10 steps
Flags
0
BackKenmore 90 Series Washing Machine
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Drive Motor Coupling
- Unplug the washing machine.
- Using a flat head screwdriver, gently wedge the end caps off of the control console in order to open it up.
Unplug the washing machine.
Using a flat head screwdriver, gently wedge the end caps off of the control console in order to open it up.
1024
Step 2
- Lift and swing the console upward.
Lift and swing the console upward.
Step 3
- Unplug the lid-switch secured under the console.
Unplug the lid-switch secured under the console.
Step 4
- Remove the console clips using a flat head screwdriver to release the chassis.
Remove the console clips using a flat head screwdriver to release the chassis.
Step 5
- Stand in front of the washer and remove the chassis by lifting and pulling it towards you to expose the lower components.
Stand in front of the washer and remove the chassis by lifting and pulling it towards you to expose the lower components.
Step 6
- Use the flat head screwdriver to flip the restraining clips and release the drain pump.
Use the flat head screwdriver to flip the restraining clips and release the drain pump.
Step 7
- Remove the drive motor by unplugging the motor connector.
Remove the drive motor by unplugging the motor connector.
Step 8
- Remove connections to the capacitor.
Remove connections to the capacitor.
Step 9
- Place the drive motor to the side and remove the direct drive coupler by sliding it off.
Place the drive motor to the side and remove the direct drive coupler by sliding it off.
Step 10
- Replace with the new direct drive coupler and use the end of your screwdriver to seat it flush on the drive motor.
Replace with the new direct drive coupler and use the end of your screwdriver to seat it flush on the drive motor.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Joshua Edwards
Member since: 09/18/2020
229 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
University of Memphis, Team S2-G7, Willis Fall 2020
Member of University of Memphis, Team S2-G7, Willis Fall 2020
UM-WILLIS-F20S2G7
1 Member
1 Guide authored
