Katadyne Hiker Water Filter Cleaning Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Katadyne Hiker Water Filter Cleaning
8 steps

Flags

BackMiscellaneous Skills
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Katadyne Hiker Water Filter Cleaning

Remove the “snap fit” guard by pulling directly away from the filter body.

Remove the “snap fit” guard by pulling directly away from the filter body.

1024

Step 2

Remove the pump handle by pulling it completely out of the shaft.

Remove the pump handle by pulling it completely out of the shaft.

Step 3

Use the pump handle to remove the filter cap.
Place the horizontal groove of the pump handle depicted in image 1 onto the filter fins.
Press the pump handle firmly against the fins and turn the filter counter clockwise.
Once unscrewed, remove the filter completely from the body.

Use the pump handle to remove the filter cap.

Place the horizontal groove of the pump handle depicted in image 1 onto the filter fins.

Press the pump handle firmly against the fins and turn the filter counter clockwise.

Once unscrewed, remove the filter completely from the body.

Step 4

Only perform this step if solid particles are evident on the outside of the filter.
Lightly brush the entire filter with a soft bristled toothbrush under running water.

Only perform this step if solid particles are evident on the outside of the filter.

Lightly brush the entire filter with a soft bristled toothbrush under running water.

Step 5

Replace the filter inside the filter body and screw clockwise until tight.

Replace the filter inside the filter body and screw clockwise until tight.

Step 6

Lubricate the pump handle O-ring extensively with the Katadyne lubricant (sold with pump).

Lubricate the pump handle O-ring extensively with the Katadyne lubricant (sold with pump).

Step 7

Replace the pump handle inside the pump handle shaft.

Replace the pump handle inside the pump handle shaft.

Step 8

Replace the “snap-fit” guard by pushing directly toward the filter body.

Replace the “snap-fit” guard by pushing directly toward the filter body.

If difficulty pumping persists, a new filter is required.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Dylan Carey

Member since: 02/24/2015

130 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team 24-6, Green Winter 2015                        

                                                  Member of Cal Poly, Team 24-6, Green Winter 2015 



                    CPSU-GREEN-W15S24G6                     


                                            4 Members                     


                                            13 Guides authored

Kenny J. Jackson - Oct 17, 2017

wow. this is very helpful post.

thanks for nice guide line..

plz cheak out this—https://waterfilterhub.com

Introduction#

What you need#

Team#

Introduction

What you need

Team