Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Karcher Vacuum Universal 14286230 2014 Opening Procedure
  • 3 steps
  • Power Switch
  • 4 steps

Flags

0

  • BackKarcher Vacuum Universal NT 65/2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unlatch the top assembly
  • Before you begin, unplug the vacuum and disconnect all hose accessories.
  • Release the two latches locking the top assembly in place.

Before you begin, unplug the vacuum and disconnect all hose accessories.

Release the two latches locking the top assembly in place.

1024

Step 2

              Remove the top assembly
  • Lift and remove the top assembly from the tank.

Lift and remove the top assembly from the tank.

Step 3

              Unscrew the top assembly
  • Remove the four T15 screws securing the top assembly.

Remove the four T15 screws securing the top assembly.

Step 4

              Remove the top cover
  • Lift and remove the top plastic cover from the motor assembly.
  • These images show the assembly with the filter portion already removed. You don’t have to remove the filter for this repair.

Lift and remove the top plastic cover from the motor assembly.

These images show the assembly with the filter portion already removed. You don’t have to remove the filter for this repair.

Step 5

              Reassembly tip
  • Reassembly tip: Follow these tips to help you re-align the plastic layers:
  • The switch module should line up with the yellow plastic switch plunger.
  • The two plastic moulded discs line up using this black tab.

Reassembly tip: Follow these tips to help you re-align the plastic layers:

The switch module should line up with the yellow plastic switch plunger.

The two plastic moulded discs line up using this black tab.

Step 6

              Loosen the switch assembly
  • Slide the switch assembly out of its plastic mount.

Slide the switch assembly out of its plastic mount.

Step 7

              Disconnect the switch
  • Unplug the wires from the switch. These are standard spade terminals that can be pulled apart.
  • Remove the switch.
  • Reassembly tip: When you plug in a new switch, use the middle image to help you properly wire the switch.

Unplug the wires from the switch. These are standard spade terminals that can be pulled apart.

Remove the switch.

Reassembly tip: When you plug in a new switch, use the middle image to help you properly wire the switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Arthur Shi

Member since: 01/03/2018

211,865 Reputation

                                      442 Guides authored                  



                       Badges:
                       46







                                                        +43 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored