Difficulty

Moderate

Steps

6

Time Required

                          5 - 15 minutes

Sections

2

  • Bottom Cover
  • 4 steps
  • Pump Cover
  • 2 steps

Flags

0

  • BackKarcher Carpet Cleaner BRC30/15C (2018)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disconnect the hose
  • Make sure the carpet cleaner is turned off and completely disconnected from power.
  • Pull the hose on the rear of the carpet cleaner straight down to disconnect it.

Make sure the carpet cleaner is turned off and completely disconnected from power.

Pull the hose on the rear of the carpet cleaner straight down to disconnect it.

1024

Step 2

              Remove the bottom cover
  • Use a 3 mm hex key to remove two bolts securing the bottom cover.

Use a 3 mm hex key to remove two bolts securing the bottom cover.

Step 3

  • Rotate the bottom cover down toward the bottom of the carpet cleaner, then pull it straight back toward the rear of the carpet cleaner to remove it.
  • Don’t completely remove the cover yet. There is a ground wire connecting the cover to the carpet cleaner that must be disconnected first.

Rotate the bottom cover down toward the bottom of the carpet cleaner, then pull it straight back toward the rear of the carpet cleaner to remove it.

Don’t completely remove the cover yet. There is a ground wire connecting the cover to the carpet cleaner that must be disconnected first.

Step 4

              Disconnect the ground wire
  • Pull the yellow and green ground wire connectors straight apart to disconnect the bottom cover’s ground wire.

Pull the yellow and green ground wire connectors straight apart to disconnect the bottom cover’s ground wire.

Step 5

              Remove the pump cover
  • Use a 3 mm hex key to remove the four bolts securing the pump cover.

Use a 3 mm hex key to remove the four bolts securing the pump cover.

Step 6

  • Remove the pump cover.

Remove the pump cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Adam O'Camb

Member since: 04/11/2015

173,479 Reputation

                                      418 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges