Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Front Panel
  • 2 steps
  • Breaker
  • 4 steps

Flags

0

  • BackKarcher Carpet Cleaner 1.006-673.0 (2014)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Follow this same procedure to remove the opposite breaker.

Note: Before beginning repairs, disconnect the device from power, disconnect all hoses, drain and depressurize the system, and let the device cool if the heater was recently used.

What you need

Step 1

              Remove the screws securing the front panel
  • Before beginning repairs, disconnect the device from power, disconnect all hoses, drain and depressurize the system, and let the device cool if the heater was recently used.
  • Use a Phillips screwdriver to remove the six screws securing the front panel.

Before beginning repairs, disconnect the device from power, disconnect all hoses, drain and depressurize the system, and let the device cool if the heater was recently used.

Use a Phillips screwdriver to remove the six screws securing the front panel.

1024

Step 2

              Tilt the front panel down
  • Grip the front panel at the top and tilt down to reveal the switch electronics.
  • The front panel will stay attached to the device with the flexible tubing.

Grip the front panel at the top and tilt down to reveal the switch electronics.

The front panel will stay attached to the device with the flexible tubing.

Step 3

              Remove the breaker button cover
  • Use a 16 mm socket to loosen the nut on the breaker button cover.

Use a 16 mm socket to loosen the nut on the breaker button cover.

Step 4

  • Remove the breaker button cover.

Remove the breaker button cover.

Step 5

              Remove the breaker wires
  • Separate the breaker from the front panel.

Separate the breaker from the front panel.

Step 6

              Remove the breaker
  • Grip the black wire by its blue connector and pull directly away from the breaker to remove it.
  • Grip the dark blue wire by its blue connector and pull directly away from the breaker to remove it.
  • Make a note of which wire goes where to help during reassembly.
  • Only the breaker remains.

Grip the black wire by its blue connector and pull directly away from the breaker to remove it.

Grip the dark blue wire by its blue connector and pull directly away from the breaker to remove it.

Make a note of which wire goes where to help during reassembly.

Only the breaker remains.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Carsten Frauenheim

Member since: 03/10/2020

81,713 Reputation

                                      330 Guides authored                  



                       Badges:
                       38







                                                        +35 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored