Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

1

  • Kambrook 600W Power Drive Blender Disassembly
  • 11 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBlender

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Kambrook 600W Power Drive Blender Disassembly
  • Firstly, take off lid by twisting anti-clockwise.
  • Remove the glass jar from the blender base by again twisting anti-clockwise.

Firstly, take off lid by twisting anti-clockwise.

Remove the glass jar from the blender base by again twisting anti-clockwise.

1024

Step 2

  • The blender blade is attached to a base component at the bottom of the blender jar.
  • To remove the blade, simply twist the attachment according to the direction written, in this case, turning anti-clockwise.
  • The blade could be then easily taken out from the jar, if difficulties occur at this stage, simply adjust the blade’s angle when removing so.

The blender blade is attached to a base component at the bottom of the blender jar.

To remove the blade, simply twist the attachment according to the direction written, in this case, turning anti-clockwise.

The blade could be then easily taken out from the jar, if difficulties occur at this stage, simply adjust the blade’s angle when removing so.

Step 3

  • Remove four screws from the base of the blender
  • Take out the ventilation opening from the base. Keep screws aside.

Remove four screws from the base of the blender

Take out the ventilation opening from the base. Keep screws aside.

Step 4

  • The clutch is attached to the bottom of the blender. This can be twisted out directly with hand.
  • The disk attached inside the clutch can be pulled out after the clutch is removed from the blender bottom.

The clutch is attached to the bottom of the blender. This can be twisted out directly with hand.

The disk attached inside the clutch can be pulled out after the clutch is removed from the blender bottom.

Step 5

  • This little component is used to stabilise wires. It can be taken out after cutting the wires.

This little component is used to stabilise wires. It can be taken out after cutting the wires.

Step 6

  • Lift out the major electronic part of the blender.
  • Cut off two pieces of wires, then take out the mini light bulb.
  • This is how the blender base should look like at the moment.

Lift out the major electronic part of the blender.

Cut off two pieces of wires, then take out the mini light bulb.

This is how the blender base should look like at the moment.

Step 7

  • Unscrew the two screws from both sides of the clasp to detach all component, this includes the motor of the blender

Unscrew the two screws from both sides of the clasp to detach all component, this includes the motor of the blender

Step 8

  • Insert wisdom here.

Insert wisdom here.

Step 9

  • To take out the back of the of blender speed dial, unscrew two screws that are located opposite each other.

To take out the back of the of blender speed dial, unscrew two screws that are located opposite each other.

Step 10

  • After taking out the back of the speed dial, the dial will fall out itself.
  • There are three individual pieces that make up the speed dial: the ring, the metal and plastic casting.

After taking out the back of the speed dial, the dial will fall out itself.

There are three individual pieces that make up the speed dial: the ring, the metal and plastic casting.

Step 11

  • The final disassembly, with all the blender parts and screws, will look like this.

The final disassembly, with all the blender parts and screws, will look like this.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Angel Lin

Member since: 10/13/2018

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       1