Difficulty
Moderate
Steps
12
Time Required
1 hour
Sections
2
- Eye Piece
- 6 steps
- Lens
- 6 steps
Flags
3
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Better Introduction
Improve this guide by completing or revising its introduction.
BackJVC GR-D93U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Eye Piece
- Unscrew two 3mm Phillips #0 screw from the bottom of the camera to remove blue plastic casing.
Unscrew two 3mm Phillips #0 screw from the bottom of the camera to remove blue plastic casing.
1024
Step 2
- Unscrew two 3mm Phillips #0 screws. Then remove 6 3mm Philips #0 screws from the bottom of the camera.
Unscrew two 3mm Phillips #0 screws. Then remove 6 3mm Philips #0 screws from the bottom of the camera.
Step 3
- Unscrew 3mm Phillips #0 screws from the batter port under the eye piece.
Unscrew 3mm Phillips #0 screws from the batter port under the eye piece.
Step 4
- Now the camera can be split into two pieces. Be careful when removing the two sides and remove the cables connecting the two halves. There are also cables that need to be disconnected from the battery pack section.
Now the camera can be split into two pieces. Be careful when removing the two sides and remove the cables connecting the two halves. There are also cables that need to be disconnected from the battery pack section.
Step 5
- Unscrew two 3mm Phillips #0 screws from around the eye piece. Then flip the camera over and unscrew 3mm Phillips #0 screw. Then unscrew 3mm Phillips #0 screw from under the eye piece.
Unscrew two 3mm Phillips #0 screws from around the eye piece. Then flip the camera over and unscrew 3mm Phillips #0 screw. Then unscrew 3mm Phillips #0 screw from under the eye piece.
Step 6
- Unscrew 3mm Phillips #0 screw and disconnect cable. This will disconnect the eye piece from the camera.
Unscrew 3mm Phillips #0 screw and disconnect cable. This will disconnect the eye piece from the camera.
Step 7
Lens
- Remove the two 3mm screws using the PH0 screwdriver.
Remove the two 3mm screws using the PH0 screwdriver.
Step 8
- Remove the blue dust cover using the metal spudger. Unscrew the 3mm screw using the PH0 screwdriver.
Remove the blue dust cover using the metal spudger. Unscrew the 3mm screw using the PH0 screwdriver.
Step 9
- Remove the two 5mm screws using the PH0 screw driver. Use the metal spudger to remove plastic casing.
Remove the two 5mm screws using the PH0 screw driver. Use the metal spudger to remove plastic casing.
Step 10
- Remove the 3mm screw using the metal spudger.
Remove the 3mm screw using the metal spudger.
Step 11
- Remove the two logic strips by lifting the plastic clips using the metal spudger.
Remove the two logic strips by lifting the plastic clips using the metal spudger.
Step 12
- Disconnect the power from the lens.
Disconnect the power from the lens.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
James
Member since: 03/16/2015
146 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Colorado Springs, Team 1-5, May Spring 2015
Member of Colorado Springs, Team 1-5, May Spring 2015
UCCS-MAY-S15S1G5
4 Members
3 Guides authored
Lee Green - Oct 6, 2017
Reply
Do you fix these yourself? This is too much for me but I love my camera and even though I can watch videos and pictures o the screen I cannot see through the view finder to take pictures. No matter what I do it stays dark. Can you fix it? My email address is sl.green2014@gmail.com. Thank you.
