Difficulty
Moderate
Steps
5
Time Required
30 minutes
Sections
1
- LCD Screen
- 5 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackJVC GR-D93U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- Unscrew 3 mm Phillips #0 screws around the LCD Screen. You will have to turn the screen to get the screws on the bottom of the screen.
Unscrew 3 mm Phillips #0 screws around the LCD Screen. You will have to turn the screen to get the screws on the bottom of the screen.
1024
Step 2
- Pry apart the plastic casing around the screen using a flat spudger tool
Pry apart the plastic casing around the screen using a flat spudger tool
Step 3
- Carefully remove the wires connected to the screen from the black box. Now you will be able to separate the screen from the camera.
Carefully remove the wires connected to the screen from the black box. Now you will be able to separate the screen from the camera.
Step 4
- Unscrew the 5 mm Phillips #0 screw that is connecting the screen to the plastic casing.
Unscrew the 5 mm Phillips #0 screw that is connecting the screen to the plastic casing.
Step 5
- You can now take out the screen to be replaced. Carefully remove cables from the data board.
You can now take out the screen to be replaced. Carefully remove cables from the data board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Lindsay
Member since: 03/16/2015
267 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Colorado Springs, Team 1-5, May Spring 2015
Member of Colorado Springs, Team 1-5, May Spring 2015
UCCS-MAY-S15S1G5
4 Members
3 Guides authored
