Difficulty
Very easy
Steps
1
Time Required
Suggest a time??
Sections
- Water Reservoir Seal
- 1 step
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackJura Impressa S85
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Water Reservoir Seal
- Remove the water reservoir.
- Turn the Jura on its side to have access to the bottom plate
- The water connector is protected by a plastic cover, which is secured by two plastic rivets.
- Use some pliers and squeeze the rivets tightly and push them up until they release.
- Carefully pry up the plastic cover.
- Insert the new gasket with the flat side facing up.
- Give some food-proof lubricant to the new seal and replace it.
Remove the water reservoir.
Turn the Jura on its side to have access to the bottom plate
The water connector is protected by a plastic cover, which is secured by two plastic rivets.
Use some pliers and squeeze the rivets tightly and push them up until they release.
Carefully pry up the plastic cover.
Insert the new gasket with the flat side facing up.
Give some food-proof lubricant to the new seal and replace it.
1024
To reassemble your device, follow these steps in reverse order
Cancel: I did not complete this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
VauWeh
oldturkey03
jana°
Author
with 1 other contributor
VauWeh
Member since: 10/19/2015
160,518 Reputation
211 Guides authored
Badges:
41
+38 more badges
