Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Right side panel
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackJura Impressa S85
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Right side panel
- Remove the two Torx T15 screws at the bottom of the side panel.
- Remove the Torx T15 screw on the front bottom right.
- Remove the Torx T15 on the right underside of the front access door. Flip the door open a few inches.
Remove the two Torx T15 screws at the bottom of the side panel.
Remove the Torx T15 screw on the front bottom right.
Remove the Torx T15 on the right underside of the front access door. Flip the door open a few inches.
1024
Step 2
- A metal plate rests loosely on the top of the side panel and holds the rotation sensor in place. Note the position of the plate. Simply lift the plate upwards.
- When reassembling, make sure that the sheet metal is put back in exactly the same way.
- First lift the side panel away a little at the bottom, then lift it out at the top.
A metal plate rests loosely on the top of the side panel and holds the rotation sensor in place. Note the position of the plate. Simply lift the plate upwards.
When reassembling, make sure that the sheet metal is put back in exactly the same way.
First lift the side panel away a little at the bottom, then lift it out at the top.
Work through the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
shingle
Annika Faelker
Author
with 1 other contributor
VauWeh
Member since: 10/19/2015
160,518 Reputation
211 Guides authored
Badges:
41
+38 more badges