Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

  • Thread and Needle
  • 9 steps

Flags

0

  • BackJuki Chainstitch Machine

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Thread and Needle
  • Pass the thread through the needle eye.

Pass the thread through the needle eye.

1024

Step 2

  • Loop the threading through the two tension posts, making sure you stay in the grooves of the wheels.

Loop the threading through the two tension posts, making sure you stay in the grooves of the wheels.

Step 3

  • Continue the threading, weaving through the pull-off lever.

Continue the threading, weaving through the pull-off lever.

Step 4

  • Adjust the thread pull-off lever as well as adjust the position of the nipper bar block to the left or the right.

Adjust the thread pull-off lever as well as adjust the position of the nipper bar block to the left or the right.

Step 5

  • Tighten the thread on the top loop near the nipper releasing knurled thumb nut.

Tighten the thread on the top loop near the nipper releasing knurled thumb nut.

Step 6

  • Weave threading through the working arm and have it ready to insert through the eye of the needle.

Weave threading through the working arm and have it ready to insert through the eye of the needle.

Step 7

  • Again, keep the thread along the groove of the wheel before slipping it through the eye of the needle.

Again, keep the thread along the groove of the wheel before slipping it through the eye of the needle.

Step 8

  • Using the flathead screwdriver, slide the needle up into the slot, with the indented side facing in and tighten until the needle cannot shift.

Using the flathead screwdriver, slide the needle up into the slot, with the indented side facing in and tighten until the needle cannot shift.

Step 9

  • Insert the thread through the eye of the needle, and you are ready for sewing.

Insert the thread through the eye of the needle, and you are ready for sewing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Connor Cherry

Member since: 02/04/2019

196 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team S27-G8, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S27-G8, Munoz Winter 2019 



                    EWU-MUNOZ-W19S27G8                     


                                            1 Member                     


                                            1 Guide authored