Jiayu F1 Volume Button Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Battery
3 steps
Volume Button
2 steps

Flags

BackJIAYU F1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Turn Off the Phone

Turn the phone off by holding down the power button located on the top of the phone.

Turn the phone off by holding down the power button located on the top of the phone.

1024

Step 2

              Remove the Back Case

Find the small indentation at the bottom right of the phone and pry open the back case of the phone using your fingernail or small plastic opening tool.
Gently remove the back case completely from the phone.

Find the small indentation at the bottom right of the phone and pry open the back case of the phone using your fingernail or small plastic opening tool.

Gently remove the back case completely from the phone.

Step 3

              Remove the Battery

Insert a fingernail or the small plastic opening tool into the recess in the bottom center of the battery and lift upward.
Remove the battery from the phone.
When replacing the battery, align the copper ports on the top right of the battery with the corresponding ports in the battery cavity.

Insert a fingernail or the small plastic opening tool into the recess in the bottom center of the battery and lift upward.

Remove the battery from the phone.

When replacing the battery, align the copper ports on the top right of the battery with the corresponding ports in the battery cavity.

Step 4

              Remove the Interior Midframe Assembly

With the phone lying face down, remove the nine 3 mm Phillips # 00 screws from the midframe.
Gently run a plastic opening tool down along the left and right sides of the phone to separate the black midframe assembly from the silver display casing.
Carefully remove the midframe assembly from the display casing by pulling up and away from the phone.

With the phone lying face down, remove the nine 3 mm Phillips # 00 screws from the midframe.

Gently run a plastic opening tool down along the left and right sides of the phone to separate the black midframe assembly from the silver display casing.

Carefully remove the midframe assembly from the display casing by pulling up and away from the phone.

Step 5

              Remove Volume Button

Locate the silver volume button on the side of the phone.
Use the precision tweezers to slide the volume button out of the groove.
When replacing the volume button align the flat side of the button to the silver edge of the display with the rounded edge facing the black frame.

Locate the silver volume button on the side of the phone.

Use the precision tweezers to slide the volume button out of the groove.

When replacing the volume button align the flat side of the button to the silver edge of the display with the rounded edge facing the black frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Nicole

Member since: 10/08/2014

211 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 9-4, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 9-4, Leahy Fall 2014 



                    USFT-LEAHY-F14S9G4                     


                                            3 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team