Difficulty
Easy
Steps
4
Time Required
20 - 35 minutes
Sections
2
- Quick-Release Lever
- 3 steps
- T-Bar
- 1 step
Flags
0
BackJD Razor 2000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unlocking the Lever
- Unlock the quick-release lever by turning the lever from a tightened position.
Unlock the quick-release lever by turning the lever from a tightened position.
1024
Step 2
Loosening the Screw
- Use a 7/32" Allen Wrench or T25 Screwdriver to loosen the screw shown.
- Be sure to fasten the opposite side of the screw before unscrewing.
- Remove the screw and note the order of the parts for reassembly.
Use a 7/32" Allen Wrench or T25 Screwdriver to loosen the screw shown.
Be sure to fasten the opposite side of the screw before unscrewing.
Remove the screw and note the order of the parts for reassembly.
Step 3
Removing the Latch
- Turn the quick-release lever over to reveal an 8mm screw.
- Use the Phillips #2 screw driver to remove the screw.
- After removing the screw, the circular latch will be detachable.
Turn the quick-release lever over to reveal an 8mm screw.
Use the Phillips #2 screw driver to remove the screw.
After removing the screw, the circular latch will be detachable.
Step 4
Remove the T-Bar
- After disassembling the Quick-Release Lever, the T-Bar is removable
After disassembling the Quick-Release Lever, the T-Bar is removable
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Shane
Member since: 10/18/2014
384 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 4-46, Amido Fall 2014
Member of Cal Poly, Team 4-46, Amido Fall 2014
CPSU-AMIDO-F14S4G46
4 Members
8 Guides authored
