Difficulty

Easy

Steps

2

Time Required

                          5 - 15 minutes            

Sections

1

  • Front Wheel
  • 2 steps

Flags

0

  • BackJD Razor 2000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing the 1.75" Axle Bolt               
  • Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
  • Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.
  • If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving
  • If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.
  • Carefully pull apart the bolt and bearing from either side of the wheel.

Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.

Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.

If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving

If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.

Carefully pull apart the bolt and bearing from either side of the wheel.

1024

Step 2

              Removing the Wheel               
  • Grip the bottom of the wheel and gently slide it out.

Grip the bottom of the wheel and gently slide it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Kaylan Naicker                     

Member since: 10/14/2014

255 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team 4-46, Amido Fall 2014                        

                                                  Member of Cal Poly, Team 4-46, Amido Fall 2014 



                    CPSU-AMIDO-F14S4G46                     


                                            4 Members                     


                                            8 Guides authored