Difficulty

Moderate

Steps

11

Time Required

                          10 - 15 minutes

Sections

2

  • Speaker Grill
  • 4 steps
  • Outside Casing
  • 7 steps

Flags

1

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackJBL Pulse 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker Grill
  • Lay the JBL Pulse 3 on its side as shown in the picture.
  • Use a plastic opening tool to lift the top right corner of the speaker grill. A small amount of force is necessary to remove the grill.

Lay the JBL Pulse 3 on its side as shown in the picture.

Use a plastic opening tool to lift the top right corner of the speaker grill. A small amount of force is necessary to remove the grill.

1024

Step 2

  • Repeat step 1 for bottom right corner of speaker grill.

Repeat step 1 for bottom right corner of speaker grill.

Step 3

  • After pulling the right side of the grill off, place thumb underneath grill as shown in the picture.
  • Lift and pull straight out to pull grill off the posts.

After pulling the right side of the grill off, place thumb underneath grill as shown in the picture.

Lift and pull straight out to pull grill off the posts.

Step 4

  • Repeat steps 1-3 for the left side of the speaker grill on the JBL Pulse 3. The speaker grill should now be completely removed from the JBL Pulse 3.

Repeat steps 1-3 for the left side of the speaker grill on the JBL Pulse 3. The speaker grill should now be completely removed from the JBL Pulse 3.

Step 5

              Outside Casing
  • Use a Phillips #00 screwdriver to remove the six black 6mm screws on the inside of the top of the bottom section.

Use a Phillips #00 screwdriver to remove the six black 6mm screws on the inside of the top of the bottom section.

Step 6

  • Turn the JBL Pulse 3 right-side up and unscrew the top ring of the device. A small amount of force and/or a cotton cloth may be necessary to remove this piece.

Turn the JBL Pulse 3 right-side up and unscrew the top ring of the device. A small amount of force and/or a cotton cloth may be necessary to remove this piece.

Step 7

  • Remove the six 5mm screws on top of the JBL Pulse 3 with a Phillips #0 screwdriver.

Remove the six 5mm screws on top of the JBL Pulse 3 with a Phillips #0 screwdriver.

Step 8

  • Pull off the top disc of the JBL Pulse 3.

Pull off the top disc of the JBL Pulse 3.

Step 9

  • Remove the five 7mm screws on the inside of the JBL Pulse 3 with a Phillips #1 screwdriver.

Remove the five 7mm screws on the inside of the JBL Pulse 3 with a Phillips #1 screwdriver.

Step 10

  • Peel off black, taped-on electrical lead from the inside side of the JBL Pulse 3.

Peel off black, taped-on electrical lead from the inside side of the JBL Pulse 3.

Step 11

  • Pull the top section of the JBL Pulse 3 up. The outside casing to the JBL Pulse 3 should now be removed.

Pull the top section of the JBL Pulse 3 up. The outside casing to the JBL Pulse 3 should now be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Kaitlyn Greenfield

Member since: 09/20/2018

1,083 Reputation

                                      6 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Central Washington University, Team S1-G2, Pengilly Fall 2018                        

                                                  Member of Central Washington University, Team S1-G2, Pengilly Fall 2018 



                    CWU-PENGILLY-F18S1G2                     


                                            3 Members                     


                                            12 Guides authored

Mark Christian Mariñas - Mar 6, 2019

Reply

Wherr can I get or buy top ring for Pulse 3?

Kaitlyn Greenfield - Mar 6, 2019

Reply

Please see our device page with the link to the manufacturer’s website. You should be able to find it there.

Raffaele T. - Jan 12, 2020

Reply

I have one of these speakers, and as the delicate outer shell broke it seems nearly impossible to find a replacement…

Any chance to get spare parts in Europe? Thank you.