Difficulty

Easy

Steps

7

Time Required

                          25 minutes            

Sections

1

  • Speaker
  • 7 steps

Flags

0

  • BackJBL L26

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker               
  • Remove the four 6.4 mm Phillips #2 screws from the front of the speaker.

Remove the four 6.4 mm Phillips #2 screws from the front of the speaker.

1024

Step 2

  • Pull the speaker out of the frame and lay it onto the side.

Pull the speaker out of the frame and lay it onto the side.

Step 3

  • Unlatch the green wire by pulling on the terminal connector and not the wire.

Unlatch the green wire by pulling on the terminal connector and not the wire.

Step 4

  • Use a small prying tool to pry the terminal connector off of the tap.
  • After you unlatched both edges, pull the black wire out.

Use a small prying tool to pry the terminal connector off of the tap.

After you unlatched both edges, pull the black wire out.

Step 5

  • Get your replacement speaker and connect the green wire by pushing the terminal connector onto the tap.

Get your replacement speaker and connect the green wire by pushing the terminal connector onto the tap.

Step 6

  • Connect the black wire by attaching the terminal connector onto the tap.
  • Use a clamping tool to clip the edges toward the tap.
  • Be careful not to clamp too hard so you don’t damage the tap.

Connect the black wire by attaching the terminal connector onto the tap.

Use a clamping tool to clip the edges toward the tap.

Be careful not to clamp too hard so you don’t damage the tap.

Step 7

  • Place the new speaker onto the frame and screw the four 6.4 mm Phillips #2 screws back in.

Place the new speaker onto the frame and screw the four 6.4 mm Phillips #2 screws back in.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Nathnael Dubale                     

Member since: 09/20/2020

245 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team S2-G45, Melo-Thaiss Fall 2020                        

                                                  Member of York University, Team S2-G45, Melo-Thaiss Fall 2020 



                    YORK-MELO-THAISS-F20S2G45                     


                                            1 Member                     


                                            1 Guide authored