Difficulty
Moderate
Steps
3
Time Required
2 - 5 minutes
Sections
1
- Front Cover
- 3 steps
Flags
0
BackJBL Go
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The outer front cover protects the rest of the parts of your speaker. If it becomes damaged, then the other parts could become damaged, as well. This could also affect the audio quality of your speaker.
Steps 1 and 2 require the use of an opening tool to scrape away the glue that holds the front cover in place. This glue is strong, so be careful as you scrape because you could cut yourself with the opening tool.
What you need
Step 1
Front Cover
- Use an opening tool to scrape around the outside of the front cover to remove the glue attaching it to the surrounding rubber layer.
Use an opening tool to scrape around the outside of the front cover to remove the glue attaching it to the surrounding rubber layer.
1024
Step 2
- Once you have scraped off all of the glue, use the opening tool to pry up the front cover.
Once you have scraped off all of the glue, use the opening tool to pry up the front cover.
Step 3
- Carefully remove the loose plastic cover from the speaker.
Carefully remove the loose plastic cover from the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Sydney Jason
Member since: 03/21/2022
587 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
University of Alabama, Team 2-4, Bedsole Spring 2022
Member of University of Alabama, Team 2-4, Bedsole Spring 2022
UA-BEDSOLE-S22S2G4
3 Members
4 Guides authored
