Jbl Flip Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

JBL Flip disassembly
6 steps
Speaker
3 steps

Flags

BackJBL Flip
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              JBL Flip disassembly

On the end with the buttons, remove the end cap using the flat head screwdriver to get between the rubber lining and the plastic.
After the cap is removed, unscrew the two 3.3mm screws using a size 1 ph screw driver.

On the end with the buttons, remove the end cap using the flat head screwdriver to get between the rubber lining and the plastic.

After the cap is removed, unscrew the two 3.3mm screws using a size 1 ph screw driver.

1024

Step 2

Unscrew four 3.3mm screws on each end of the JBL using a size 1 ph screw driver (8 screws total).

Unscrew four 3.3mm screws on each end of the JBL using a size 1 ph screw driver (8 screws total).

Step 3

Remove outermost white casing by gently lifting up on one side.
Remove two 5mm screws holding the silver back plate in place with a size 2 ph screw driver.
Gently lift up and remove the silver casing.

Remove outermost white casing by gently lifting up on one side.

Remove two 5mm screws holding the silver back plate in place with a size 2 ph screw driver.

Gently lift up and remove the silver casing.

Step 4

Remove last white back plate to expose the back of the speaker cover.

Remove last white back plate to expose the back of the speaker cover.

Step 5

Pry the four tabs on each side of the speaker cover (8 tabs total).
Pry the two tabs on each end to remove the cover (4 tabs total).
Slide speaker out of metal speaker cover.

Pry the four tabs on each side of the speaker cover (8 tabs total).

Pry the two tabs on each end to remove the cover (4 tabs total).

Slide speaker out of metal speaker cover.

Step 6

Remove 5mm screw in the middle of the back of the device with a size 2 ph screw driver.
Unscrew the two 5mm screws on each side using a size 2 ph screwdriver.
Open the speaker.

Remove 5mm screw in the middle of the back of the device with a size 2 ph screw driver.

Unscrew the two 5mm screws on each side using a size 2 ph screwdriver.

Open the speaker.

Step 7

              Speaker

Remove screws that hold the plastic L-pipe in place.

Remove screws that hold the plastic L-pipe in place.

Step 8

Remove L-pipe.
Remove two screws on each speaker.
Remove speakers.

Remove L-pipe.

Remove two screws on each speaker.

Remove speakers.

Step 9

Take a soldering iron to the two solders, one for each cable.
Soldering iron will be very hot.
Once the soldering has melted, remove each wire from the speaker.

Take a soldering iron to the two solders, one for each cable.

Soldering iron will be very hot.

Once the soldering has melted, remove each wire from the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors

                    Dillon

Member since: 03/11/2015

1,469 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Colorado Springs, Team 9-5, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 9-5, Panko Spring 2015 



                    UCCS-PANKO-S15S9G5                     


                                            3 Members                     


                                            5 Guides authored

feroz4u786 - Mar 28, 2016

I want JBL flip 2 charging commector board.

Where can i buy ??

Plz help me

ingridxpan - Aug 9, 2016

Where do you buy the replacement speakers?

Alvaro Rivas Rodriguez - Nov 24, 2016

I have a problem with the bluetooth of my speaker goes off after 10 minutes of running I have checked with several smart and it always repeats that I can do

Where I can get schematic diagram and plans of this equipment

jonessangeeta - Sep 13, 2019

I want to buy 2pcs replacement speaker for my JBL flip bluetooth speaker. Ho can I buy .and from

Introduction#

What you need#

Team#

Introduction

What you need

Team