Jbl Flip Disassembly Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

JBL Flip disassembly
6 steps

Flags

BackJBL Flip
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              JBL Flip disassembly

On the end with the buttons, remove the end cap using the flat head screwdriver to get between the rubber lining and the plastic.
After the cap is removed, unscrew the two 3.3mm screws using a size 1 ph screw driver.

On the end with the buttons, remove the end cap using the flat head screwdriver to get between the rubber lining and the plastic.

After the cap is removed, unscrew the two 3.3mm screws using a size 1 ph screw driver.

1024

Step 2

Unscrew four 3.3mm screws on each end of the JBL using a size 1 ph screw driver (8 screws total).

Unscrew four 3.3mm screws on each end of the JBL using a size 1 ph screw driver (8 screws total).

Step 3

Remove outermost white casing by gently lifting up on one side.
Remove two 5mm screws holding the silver back plate in place with a size 2 ph screw driver.
Gently lift up and remove the silver casing.

Remove outermost white casing by gently lifting up on one side.

Remove two 5mm screws holding the silver back plate in place with a size 2 ph screw driver.

Gently lift up and remove the silver casing.

Step 4

Remove last white back plate to expose the back of the speaker cover.

Remove last white back plate to expose the back of the speaker cover.

Step 5

Pry the four tabs on each side of the speaker cover (8 tabs total).
Pry the two tabs on each end to remove the cover (4 tabs total).
Slide speaker out of metal speaker cover.

Pry the four tabs on each side of the speaker cover (8 tabs total).

Pry the two tabs on each end to remove the cover (4 tabs total).

Slide speaker out of metal speaker cover.

Step 6

Remove 5mm screw in the middle of the back of the device with a size 2 ph screw driver.
Unscrew the two 5mm screws on each side using a size 2 ph screwdriver.
Open the speaker.

Remove 5mm screw in the middle of the back of the device with a size 2 ph screw driver.

Unscrew the two 5mm screws on each side using a size 2 ph screwdriver.

Open the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.

Author

                                      with 3 other contributors

                    Dillon

Member since: 03/11/2015

1,469 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Colorado Springs, Team 9-5, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 9-5, Panko Spring 2015 



                    UCCS-PANKO-S15S9G5                     


                                            3 Members                     


                                            5 Guides authored

Ricky Tomas - May 27, 2016

How do i take apart jbl flip 3

fwathika - Jan 25, 2017

My jbl flip 3 Bluetooth button does not function.How do I fix the problem?

Francis

Paul Moulang - Jun 23, 2017

The charging PCB on my Flip3 is damaged and needs to be replaced. Any chance of purchasing the charging/interface module, fully populated?

I live in South Africa, and cannot find it here!

Paul M

Suresh Karve - Aug 28, 2017

The charging PCB on my JBL Flip3 is also damaged and needs to be replaced. Any chance of purchasing the charging/interface module?

I live in Pune - Maharashtra in India and cannot find a good reliable service station for JBL speakers here!

Suresh Karve

Introduction#

What you need#

Team#

Introduction

What you need

Team