Jbl Flip 4 Shell Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Shell
2 steps

Flags

BackJBL Flip 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Shell

Insert the plastic opening tool in the crack in between the cover and the rubber spine with the power button.
Pry off the cover, beginning with the side without the volume and bluetooth buttons.
When prying the cover off, the six clips (three along each side of rubber spine) that attach the cover to the speaker will make snapping sounds.
Watch out not to damage the clips on the buttons’ side, pry open with caution.
Pull the cover off with your thumbs.

Insert the plastic opening tool in the crack in between the cover and the rubber spine with the power button.

Pry off the cover, beginning with the side without the volume and bluetooth buttons.

When prying the cover off, the six clips (three along each side of rubber spine) that attach the cover to the speaker will make snapping sounds.

Watch out not to damage the clips on the buttons’ side, pry open with caution.

Pull the cover off with your thumbs.

1024

Step 2

Remove four 13 mm JIS #0 screws attaching the rubber spine to the speaker, located on both sides of the inside of the speaker.
Use the plastic opening tool to release the clips holding the central part of the rubber spine.
Pry away one end of the rubber spine with your thumbs and it should come off.
Prying off the spine may take some persuading.
The speakers are strong magnets. Keep it away from other sensitive electronics.

Remove four 13 mm JIS #0 screws attaching the rubber spine to the speaker, located on both sides of the inside of the speaker.

Use the plastic opening tool to release the clips holding the central part of the rubber spine.

Pry away one end of the rubber spine with your thumbs and it should come off.

Prying off the spine may take some persuading.

The speakers are strong magnets. Keep it away from other sensitive electronics.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 4 other contributors

                    Philip Pang

Member since: 10/08/2018

1,133 Reputation

                                      4 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Cal Poly, Team S4-G3, White Fall 2018                        

                                                  Member of Cal Poly, Team S4-G3, White Fall 2018 



                    CPSU-WHITE-F18S4G3                     


                                            4 Members                     


                                            36 Guides authored

Introduction#

What you need#

#

#

#

#

Team#

#

Introduction

What you need

Team