Difficulty

Very easy

Steps

4

Time Required

                          5 - 15 minutes

Sections

1

  • JBL Charge 2 Teardown
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackJBL Charge 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This loudspeaker was tinkered at the charge port (installation of a new one).

What you need

Video Overview

Step 1

              Protection Grids
  • Use a plastic spatula or credit card to open the grids
  • You should not have to exert too much force on the grids. There is a little bit of glue on it.

Use a plastic spatula or credit card to open the grids

You should not have to exert too much force on the grids. There is a little bit of glue on it.

1024

Step 2

              Screw!
  • Remove the first 4 screws
  • Blow up the round of plastic then take care of the remaining 4 screws.

Remove the first 4 screws

Blow up the round of plastic then take care of the remaining 4 screws.

Step 3

              We're in!
  • Now you can access the motherboard.
  • To disconnect the battery: disconnect the microphone first, it will make things easier.

Now you can access the motherboard.

To disconnect the battery: disconnect the microphone first, it will make things easier.

Step 4

              Drums
  • Unscrew the two screws of the white cover
  • Get out of his notch, and here’s the battery!

Unscrew the two screws of the white cover

Get out of his notch, and here’s the battery!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Alexandre Isaac

Olivier

irlanda

Sandra Hiller

and 5 others…

                 +5

Author

                                      with 1 other contributor 


                    Alexandre Isaac

Member since: 04/07/2013

2,644 Reputation

                                      8 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges

Team

                       The Repair Academy                        

                                                  Member of The Repair Academy 



                    Business                     


                                            1 Member                     


                                            18 Guides authored

Rick Purchase - Sep 14, 2016

Reply

About to try this, will give feedback

The Daniel - Jan 7, 2017

Reply

This is the charge2 + not the charge2

Norman Ingham - May 4, 2017

Reply

there aren,t any screws in the cap

Bobcov - Apr 11, 2019

I have the same problem. I think this is a TL model, but I have not been able to find any information on how to correctly remove the end caps. I don’t want to scratch or break anything trying to pop the end caps off.

itgotfixed - Aug 18, 2017

Reply

Thanks so much! I had a broken bit of plastic inside the tube after I left my speaker in my checked luggage and it got smashed around. I followed the instructions and managed to get it out, the speaker is purring again without the annoying ass rattle!! You’re a legend my friend. TY