Difficulty

Moderate

Steps

9

Time Required

                          20 minutes

Sections

2

  • Battery
  • 6 steps
  • Speakers
  • 3 steps

Flags

0

  • BackJBL Charge 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the screen cover from the speaker using a metal spudger.

Remove the screen cover from the speaker using a metal spudger.

1024

Step 2

  • Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.
  • Remove the end cap of the device. Repeat the same process to remove the other end cap.

Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.

Remove the end cap of the device. Repeat the same process to remove the other end cap.

Step 3

  • To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.
  • Twist off the end cap and remove them from the device.

To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.

Twist off the end cap and remove them from the device.

Step 4

  • Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.
  • Pry away the plastic battery cover with a plastic spudger.

Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.

Pry away the plastic battery cover with a plastic spudger.

Step 5

  • Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

Step 6

  • Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.
  • Slide the battery free.

Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.

Slide the battery free.

Step 7

              Speakers
  • Remove the opposite screen cover using a metal spudger

Remove the opposite screen cover using a metal spudger

Step 8

  • Use the Phillips #1 screwdriver (PH1) to remove the (8) eight screws.
  • Pull out the speakers from the device.

Use the Phillips #1 screwdriver (PH1) to remove the (8) eight screws.

Pull out the speakers from the device.

Step 9

  • Disconnect the wiring from the speaker by using the fine tip pry tool.
  • Remove the speakers from the device.

Disconnect the wiring from the speaker by using the fine tip pry tool.

Remove the speakers from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Mauzor Ilonzo

Member since: 09/26/2017

483 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S2-G4, Passmore Fall 2017                        

                                                  Member of USF Tampa, Team S2-G4, Passmore Fall 2017 



                    USFT-PASSMORE-F17S2G4                     


                                            4 Members                     


                                            8 Guides authored