Jbl Charge 2 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Battery
6 steps

Flags

BackJBL Charge 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Remove the screen cover from the speaker using a metal spudger.

Remove the screen cover from the speaker using a metal spudger.

1024

Step 2

Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.
Remove the end cap of the device. Repeat the same process to remove the other end cap.

Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.

Remove the end cap of the device. Repeat the same process to remove the other end cap.

Step 3

To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.
Twist off the end cap and remove them from the device.

To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.

Twist off the end cap and remove them from the device.

Step 4

Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.
Pry away the plastic battery cover with a plastic spudger.

Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.

Pry away the plastic battery cover with a plastic spudger.

Step 5

Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

Step 6

Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.
Slide the battery free.

Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.

Slide the battery free.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 5 other contributors

                    Mauzor Ilonzo

Member since: 09/26/2017

483 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S2-G4, Passmore Fall 2017                        

                                                  Member of USF Tampa, Team S2-G4, Passmore Fall 2017 



                    USFT-PASSMORE-F17S2G4                     


                                            4 Members                     


                                            8 Guides authored

Jeroen Cox - Jun 10, 2020

Thanks for the manual! Easy repair this way.

Rogelio Fernandez - Jun 23, 2020

The JBL Charge 2 I have only needs the rear screen to be taken off. Once removed, just unscrew the battery holder plate. No need to unscrew the bass speakers. The battery plate is pretty well protected against water entering. You have to remove some silicone caulking to take out the power plug. My speaker takes the “New” Charge 2 battery.

Vasudev Chiratla - Jan 6, 2021

Could you please suggest me where to buy battery for JBL Charge 2. Iam from Visakhapatnam, India. My mail vasudev.chiratla@gmail.com.

Introduction#

What you need#

Team#

Introduction

What you need

Team