Difficulty
Moderate
Steps
6
Time Required
25 minutes
Sections
2
- Back Cover
- 2 steps
- Camera
- 4 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackJazz UltraTab C855
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the 4 exterior screws using a Phillips #000 Screwdriver .
Remove the 4 exterior screws using a Phillips #000 Screwdriver .
1024
Step 2
- Pry the back case off using the blue Plastic Opening Tools. Work one along the seem until you can get your fingers under to pull it apart.
Pry the back case off using the blue Plastic Opening Tools. Work one along the seem until you can get your fingers under to pull it apart.
Step 3
Camera
- Remove the two screws holding the internal camera in place.
Remove the two screws holding the internal camera in place.
Step 4
- Carefully remove the tape of the ribbon cables attached to the camera.
Carefully remove the tape of the ribbon cables attached to the camera.
Step 5
- Using a plastic opening tool, lift open the tab that holds the connection between the camera and motherboard in place. The ribbon cable will become detached.
Using a plastic opening tool, lift open the tab that holds the connection between the camera and motherboard in place. The ribbon cable will become detached.
Step 6
- Finally, detach the camera lenses from the cover by gently pulling them away from the case.
Finally, detach the camera lenses from the cover by gently pulling them away from the case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Kyle Haas
Member since: 09/16/2015
245 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
IUPUI, Team 1-3, Baechle Fall 2015
Member of IUPUI, Team 1-3, Baechle Fall 2015
IUPUI-BAECHLE-F15S1G3
5 Members
10 Guides authored