Difficulty

Difficult

Steps

10

Time Required

Suggest a time??

Sections

1

  • Screen
  • 10 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackJazz UltraTab C1059-HL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • First step is to remove screws from top and bottom of device.

First step is to remove screws from top and bottom of device.

1024

Step 2

  • Remove the back panel of the device.
  • Be careful not to brake/bend the plastic cover of your device.

Remove the back panel of the device.

Be careful not to brake/bend the plastic cover of your device.

Step 3

  • Upon removing the back panel, place the device screen down on the table.

Upon removing the back panel, place the device screen down on the table.

Step 4

  • Remove all data strips attached to the motherboard.

Remove all data strips attached to the motherboard.

Step 5

  • Remove the tape around the battery.
  • One of these pieces of tape holds down the battery connection to the mainboard.
  • Use the soldering iron to disconnect these wires.
  • You will need to use a tool to pry off the battery. It will have a good amount of adhesive holding it down.
  • Be cautious not to bend the battery when prying.

Remove the tape around the battery.

One of these pieces of tape holds down the battery connection to the mainboard.

Use the soldering iron to disconnect these wires.

You will need to use a tool to pry off the battery. It will have a good amount of adhesive holding it down.

Be cautious not to bend the battery when prying.

Step 6

  • Once the battery is removed, make sure to remove any and all data strips that are attached.
  • Then begin to unscrew the mother board.

Once the battery is removed, make sure to remove any and all data strips that are attached.

Then begin to unscrew the mother board.

Step 7

  • Remove the motherboard chip off of the device.

Remove the motherboard chip off of the device.

Step 8

  • Your board should look like this after taking all of the components off the screen panel.

Your board should look like this after taking all of the components off the screen panel.

Step 9

  • Remove the Display Module from the screen cover.

Remove the Display Module from the screen cover.

Step 10

  • Now, you can replace your broken or damaged screen!

Now, you can replace your broken or damaged screen!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Amanda Justiniano

Member since: 09/19/2015

231 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team 1-3, Wilson Fall 2015                        

                                                  Member of IUPUI, Team 1-3, Wilson Fall 2015 



                    IUPUI-WILSON-F15S1G3                     


                                            4 Members                     


                                            6 Guides authored