Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Headphone Jack
- 5 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackJazz UltraTab C1059-HL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Headphone Jack
- Use a Philips screwdriver to remove the four screws: two at the top and two at the bottom of the device.
Use a Philips screwdriver to remove the four screws: two at the top and two at the bottom of the device.
1024
Step 2
- Place the device screen down on the table and use a pry tool to remove the back panel.
Place the device screen down on the table and use a pry tool to remove the back panel.
Step 3
- For your safety, remove the battery.
- Using a solder iron, remove the wires connecting the battery to the motherboard.
For your safety, remove the battery.
Using a solder iron, remove the wires connecting the battery to the motherboard.
Step 4
- Remove the screw attaching the motherboard to the back panel. Gently remove the motherboard.
Remove the screw attaching the motherboard to the back panel. Gently remove the motherboard.
Step 5
- The headphone jack is attached to the motherboard, so the whole thing must be replaced.
- With the new mother board, use these steps in reverse to reassemble the device.
The headphone jack is attached to the motherboard, so the whole thing must be replaced.
With the new mother board, use these steps in reverse to reassemble the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Tim Poe
Member since: 09/26/2015
361 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
IUPUI, Team 1-3, Wilson Fall 2015
Member of IUPUI, Team 1-3, Wilson Fall 2015
IUPUI-WILSON-F15S1G3
4 Members
6 Guides authored
