Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Camera
- 4 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackJazz UltraTab C1059-HL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- First step is to remove the screws. You can find the screws on top and bottom edge of the device.
First step is to remove the screws. You can find the screws on top and bottom edge of the device.
1024
Step 2
- Remove the back panel of the device using an opening tool.
Remove the back panel of the device using an opening tool.
Step 3
- Upon removing the back panel, place the device screen down on the table.
Upon removing the back panel, place the device screen down on the table.
Step 4
- There are two screws holding the camera. Remove them.
- The next step is to lift the Touch Screen Digitizer (the black piece).
- Slide out the Data Strip.
- Detach the camera, and remove it.
- Replace the camera, and reassemble.
There are two screws holding the camera. Remove them.
The next step is to lift the Touch Screen Digitizer (the black piece).
Slide out the Data Strip.
Detach the camera, and remove it.
Replace the camera, and reassemble.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Tim Poe
Member since: 09/26/2015
361 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
IUPUI, Team 1-3, Wilson Fall 2015
Member of IUPUI, Team 1-3, Wilson Fall 2015
IUPUI-WILSON-F15S1G3
4 Members
6 Guides authored
