Jazz Ultratab C1059 Hl Antenna Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

• Antenna
• 10 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackJazz UltraTab C1059-HL

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Antenna               

• First step is to remove screws from top and bottom of device.

First step is to remove screws from top and bottom of device.

1024

Step 2

• Remove the back panel of the device.

Remove the back panel of the device.

Step 3

• Upon removing the back panel, place the device screen down on the table.

Upon removing the back panel, place the device screen down on the table.

Step 4

• Identify the antenna cover on the top of the device.

Identify the antenna cover on the top of the device.

Step 5

• Remove the two screws holding the antenna cover in place.

Remove the two screws holding the antenna cover in place.

Step 6

• Use a prying tool to remove the plastic piece off of the antenna component.

Use a prying tool to remove the plastic piece off of the antenna component.

Step 7

• Identify the antenna component as the gray cable that comes out of the plastic cover.

Identify the antenna component as the gray cable that comes out of the plastic cover.

Step 8

• Remove all of the adhesive tape pieces off of the antenna cable.

Remove all of the adhesive tape pieces off of the antenna cable.

Step 9

• Once all of the adhesive tape has been removed. Pull out the antenna component.

Once all of the adhesive tape has been removed. Pull out the antenna component.

Step 10

• The antenna will be attached to the chip in your device. Be careful not to pull off.
• Solder of the wire that is connected to the chip in order to be able to remove the antenna component.
• Once this is done, you can replace your old antenna with a new one!

The antenna will be attached to the chip in your device. Be careful not to pull off.

Solder of the wire that is connected to the chip in order to be able to remove the antenna component.

Once this is done, you can replace your old antenna with a new one!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Amanda Justiniano                     

Member since: 09/19/2015

231 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team 1-3, Wilson Fall 2015                        

                                                  Member of IUPUI, Team 1-3, Wilson Fall 2015 



                    IUPUI-WILSON-F15S1G3                     


                                            4 Members                     


                                            6 Guides authored