Difficulty

Easy

Steps

3

Time Required

                          10 - 15 minutes

Sections

2

  • Rear Panel
  • 1 step
  • Camera Assembly
  • 2 steps

Flags

0

  • BackiVIEW-754TPC

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Panel
  • Before disassembling your tablet, make sure it is powered off.
  • Use plastic opening tool to release the clips holding the device together. The clips will take a small amount of pressure to release. Once you have the plastic opening tool inserted, use a twisting action to release the clips. Start from bottom of device and work all the way around.

Before disassembling your tablet, make sure it is powered off.

Use plastic opening tool to release the clips holding the device together. The clips will take a small amount of pressure to release. Once you have the plastic opening tool inserted, use a twisting action to release the clips. Start from bottom of device and work all the way around.

1024

Step 2

              Camera Assembly
  • The camera module is located directly under the top right corner of the back cover.
  • Peel back the tape holding down the camera ribbon connector using a pair of tweezers.
  • As you peel the tape backward, the front facing camera may come out, this is not an issue.
  • If the front facing camera does not come out, gently lift it out with a pair of tweezers

The camera module is located directly under the top right corner of the back cover.

Peel back the tape holding down the camera ribbon connector using a pair of tweezers.

As you peel the tape backward, the front facing camera may come out, this is not an issue.

If the front facing camera does not come out, gently lift it out with a pair of tweezers

Step 3

              Remove Camera
  • Use a spudger to lift flap on top of the camera ZIF adapter.
  • At this point the camera module can be easily removed with a pair of tweezers.
  • During reassembly, make sure you put the ZIF adapter snugly back into its socket and secure the flap.

Use a spudger to lift flap on top of the camera ZIF adapter.

At this point the camera module can be easily removed with a pair of tweezers.

During reassembly, make sure you put the ZIF adapter snugly back into its socket and secure the flap.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Robert Clark

Member since: 01/21/2015

1,065 Reputation

                                      7 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       USF Tampa, Team 5-4, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 5-4, Brown Winter 2015 



                    USFT-BROWN-W15S5G4                     


                                            4 Members                     


                                            16 Guides authored