Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

2

  • iRULU AX106 Disassembly
  • 3 steps
  • Speaker
  • 1 step

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackiRULU AX106

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              iRULU AX106 Disassembly
  • Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.
  • There may be plastic covers protecting the screws, if this is the case take a phillips head screwdriver, and gently apply pressure on the covers until they come off.

Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.

There may be plastic covers protecting the screws, if this is the case take a phillips head screwdriver, and gently apply pressure on the covers until they come off.

1024

Step 2

  • Use the opening tool to pry the screen from the case applying pressure at each of the four corners of the screen.
  • While a good deal of force is required to separate the screen from the case, make sure to separate the screen from the case at each corner before attempting to completely remove the screen. There are delicate wires that may be damaged if the screen is removed is before the corners are separated.

Use the opening tool to pry the screen from the case applying pressure at each of the four corners of the screen.

While a good deal of force is required to separate the screen from the case, make sure to separate the screen from the case at each corner before attempting to completely remove the screen. There are delicate wires that may be damaged if the screen is removed is before the corners are separated.

Step 3

  • Using a pair of tweezers, gently unplug connectors A and B from the logic board.
  • Completely separate the screen and case.

Using a pair of tweezers, gently unplug connectors A and B from the logic board.

Completely separate the screen and case.

Step 4

              Speaker
  • Locate the two speakers and using the soldering iron and solder sucker carefully remove the solder that binds the two speakers down.
  • Insert the new speaker heads where the old speakers were previously.
  • Now use the soldering iron to solder the leads of the two speakers onto the logic board.
  • Be careful, the soldering iron will be extremely hot.

Locate the two speakers and using the soldering iron and solder sucker carefully remove the solder that binds the two speakers down.

Insert the new speaker heads where the old speakers were previously.

Now use the soldering iron to solder the leads of the two speakers onto the logic board.

Be careful, the soldering iron will be extremely hot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Andrew Mele

Member since: 03/24/2015

146 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 4-7, Vijaybhaskar Spring 2015                        

                                                  Member of UMass Dartmouth, Team 4-7, Vijaybhaskar Spring 2015 



                    UMASSD-VIJAYBHASKAR-S15S4G7                     


                                            3 Members                     


                                            8 Guides authored