Irulu Ax106 Disassembly Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes

Sections

iRULU AX106 Disassembly
3 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

BackiRULU AX106
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              iRULU AX106 Disassembly

Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.
There may be plastic covers protecting the screws, if this is the case take a phillips head screwdriver, and gently apply pressure on the covers until they come off.

Using a Philips head #00 screwdriver locate and remove each of the four screws located along the tall side of the iRulu.

There may be plastic covers protecting the screws, if this is the case take a phillips head screwdriver, and gently apply pressure on the covers until they come off.

1024

Step 2

Use the opening tool to pry the screen from the case applying pressure at each of the four corners of the screen.
While a good deal of force is required to separate the screen from the case, make sure to separate the screen from the case at each corner before attempting to completely remove the screen. There are delicate wires that may be damaged if the screen is removed is before the corners are separated.

Use the opening tool to pry the screen from the case applying pressure at each of the four corners of the screen.

While a good deal of force is required to separate the screen from the case, make sure to separate the screen from the case at each corner before attempting to completely remove the screen. There are delicate wires that may be damaged if the screen is removed is before the corners are separated.

Step 3

Using a pair of tweezers, gently unplug connectors A and B from the logic board.
Completely separate the screen and case.

Using a pair of tweezers, gently unplug connectors A and B from the logic board.

Completely separate the screen and case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 6 other contributors

                    Andrew Mele

Member since: 03/24/2015

146 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 4-7, Vijaybhaskar Spring 2015                        

                                                  Member of UMass Dartmouth, Team 4-7, Vijaybhaskar Spring 2015 



                    UMASSD-VIJAYBHASKAR-S15S4G7                     


                                            3 Members                     


                                            8 Guides authored

Markup Mishap#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Markup Mishap

Introduction

What you need

Team