Irobot Roomba I7 Side Brush Replacement Repair Guide

Difficulty

Very easy

Steps

2

Time Required

                          5 minutes            

Sections

1

• Side Brush
• 2 steps

Flags

0

• BackiRobot Roomba i7

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The iRobot Roomba i7 Side Brush is located on the right side of the Roomba. The function of the Side Brush is to sweep debris from wall edges and corners and push it into the cleaning path to be suctioned off your floors.

Before you begin using this guide, make sure that your Roomba is turned off and disconnected from the charging station, or Home Base.

What you need

Step 1

              Side Brush               

• Flip the iRobot Roomba i7 so that the underside is facing upwards.
• Using a Phillips #1 screwdriver, unscrew the 6.27mm-screw in the center of the side brush.

Flip the iRobot Roomba i7 so that the underside is facing upwards.

Using a Phillips #1 screwdriver, unscrew the 6.27mm-screw in the center of the side brush.

1024

Step 2

• After unscrewing the side brush screw, gently pull the brush up, as shown in the picture.
• If the side brush is difficult to pull, use a plastic opening tool to take it out.

After unscrewing the side brush screw, gently pull the brush up, as shown in the picture.

If the side brush is difficult to pull, use a plastic opening tool to take it out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Ricardo Pazos Rodriguez                     

Member since: 01/30/2020

456 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S14-G5, Lamothe Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S14-G5, Lamothe Spring 2020 



                    ERAU-LAMOTHE-S20S14G5                     


                                            4 Members                     


                                            5 Guides authored