Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Filter
- 4 steps
Flags
0
BackiRobot Roomba i7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The filter for the iRobot Roomba i7 is located in the removable debris bin towards the rear of the device. The filter prevents dust and debris from escaping the debris bin.
Before you begin using this guide, make sure that your Roomba is turned off and disconnected from the charging station, or Home Base.
Warning: Do not clean the filter with any type of liquid. This process will also be very dusty and can cause reactions in those with severe allergies.
Step 1
Filter
- Flip the iRobot Roomba i7 so that the underside is facing upwards and the back is facing you.
- On the left side at the back press the release button for the waste bin.
Flip the iRobot Roomba i7 so that the underside is facing upwards and the back is facing you.
On the left side at the back press the release button for the waste bin.
1024
Step 2
- Once the bin is removed, empty any waste into a trash can.
- Be careful while emptying. Dust may escape and cause allergies.
Once the bin is removed, empty any waste into a trash can.
Be careful while emptying. Dust may escape and cause allergies.
Step 3
- Locate the filter on the side of the bin.
- Placing your fingers on the light grey area, pull the filter directly out of the bin.
- If replacing the filter, follow these steps in reverse order.
Locate the filter on the side of the bin.
Placing your fingers on the light grey area, pull the filter directly out of the bin.
If replacing the filter, follow these steps in reverse order.
Step 4
- To clean the filter, tap it on the inside of a trash can.
- Be careful not to shake dust everywhere; it may cause allergies.
- Do not clean the filter with any type of liquid.
To clean the filter, tap it on the inside of a trash can.
Be careful not to shake dust everywhere; it may cause allergies.
Do not clean the filter with any type of liquid.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Ricardo Pazos Rodriguez
Member since: 01/30/2020
456 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Embry-Riddle Aeronautical University, Team S14-G5, Lamothe Spring 2020
Member of Embry-Riddle Aeronautical University, Team S14-G5, Lamothe Spring 2020
ERAU-LAMOTHE-S20S14G5
4 Members
5 Guides authored
Christopher Liddle - Dec 9, 2021
Reply
Question, please! I am unable to pull the filter out of the bin. It’s stuck. Any suggestions?