Difficulty
Moderate
Steps
6
Time Required
5 minutes
Sections
3
- Side Brush
- 2 steps
- Bottom Panel
- 2 steps
- Wheels
- 2 steps
Flags
2
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Better Introduction
Improve this guide by completing or revising its introduction.
BackiRobot Roomba e5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Side Brush
- Loosen the screw in the middle of the side brush using a Phillips #1 screwdriver.
Loosen the screw in the middle of the side brush using a Phillips #1 screwdriver.
1024
Step 2
- Lift the side brush up from the vacuum.
Lift the side brush up from the vacuum.
Step 3
Bottom Panel
- Loosen the five captive screws on the bottom of the Roomba using a Phillips #1 screwdriver.
Loosen the five captive screws on the bottom of the Roomba using a Phillips #1 screwdriver.
Step 4
- Remove the bottom panel of the Roomba.
Remove the bottom panel of the Roomba.
Step 5
Wheels
- Loosen the two captive screws closest to the wheel using a Phillips #0 screwdriver.
Loosen the two captive screws closest to the wheel using a Phillips #0 screwdriver.
Step 6
- Pull the wheel out of the Roomba.
- Repeat Steps 5 and 6 for the opposite wheel.
Pull the wheel out of the Roomba.
Repeat Steps 5 and 6 for the opposite wheel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
McKayla Davis
Member since: 03/24/2022
327 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Casper College, Team 1-2, Lareau Spring 2022
Member of Casper College, Team 1-2, Lareau Spring 2022
CASC-LAREAU-S22S1G2
4 Members
6 Guides authored
