Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 3 steps
  • Rear Wheels
  • 3 steps

Flags

0

  • BackiRobot Roomba 980

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

1024

Step 2

  • Unscrew the back plate using a Phillips #1 screwdriver.
  • Carefully lift the panel up once the screws are removed.

Unscrew the back plate using a Phillips #1 screwdriver.

Carefully lift the panel up once the screws are removed.

Step 3

  • With both hands, grab the two black tabs on each end of the battery.
  • Pull the tabs upwards to remove the battery.

With both hands, grab the two black tabs on each end of the battery.

Pull the tabs upwards to remove the battery.

Step 4

              Rear Wheels
  • Loosen the screw on the side brush.
  • Lift the side brush from the device.

Loosen the screw on the side brush.

Lift the side brush from the device.

Step 5

  • Unscrew the (2) 11.5mm screws using the Phillips #1 screwdriver.
  • Carefully remove the plate by lifting it off of the device.

Unscrew the (2) 11.5mm screws using the Phillips #1 screwdriver.

Carefully remove the plate by lifting it off of the device.

Step 6

  • Removing the brush module may ease the removal of the wheel module
  • Locate the (3) 15.8mm gold Phillips #1 screws and unscrew them.
  • Lift the wheel module removing it from the vacuum.
  • Remove the other wheel by repeating these steps.

Removing the brush module may ease the removal of the wheel module

Locate the (3) 15.8mm gold Phillips #1 screws and unscrew them.

Lift the wheel module removing it from the vacuum.

Remove the other wheel by repeating these steps.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Ernesto Rodriguez Romero

Member since: 09/27/2017

929 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S14-G2, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G2, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G2                     


                                            4 Members                     


                                            5 Guides authored