Irobot Roomba 960 Side Wheels Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 minutes            

Sections

3

• Battery
• 4 steps
• Side-Brush
• 2 steps
• Side Wheels
• 3 steps

Flags

1

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

• BackiRobot Roomba 960

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn the Roomba upside down and orient it so that the wheels are facing upwards and the dustbin is furthest from you.

Turn the Roomba upside down and orient it so that the wheels are facing upwards and the dustbin is furthest from you.

1024

Step 2

• With the Phillips #1 screwdriver, remove the two 11.4mm screws.

With the Phillips #1 screwdriver, remove the two 11.4mm screws.

Step 3

• Lift the plastic cover to access the battery.

Lift the plastic cover to access the battery.

Step 4

• Using the two black flaps located at the sides of the battery, pull it towards you.
• Carefully remove the battery.

Using the two black flaps located at the sides of the battery, pull it towards you.

Carefully remove the battery.

Step 5

              Side-Brush               

• With the Flathead 2.5mm screwdriver remove the 7.9mm screw from the side-brush.

With the Flathead 2.5mm screwdriver remove the 7.9mm screw from the side-brush.

Step 6

• Pull the side-brush towards you.
• Carefully remove the side-brush.

Pull the side-brush towards you.

Carefully remove the side-brush.

Step 7

              Side Wheels               

• Using a Phillips #1 screwdriver, unscrew the two 11.4mm screws that hold the bottom cover.
• Lift to remove the plastic back panel.

Using a Phillips #1 screwdriver, unscrew the two 11.4mm screws that hold the bottom cover.

Lift to remove the plastic back panel.

Step 8

• Using a Phillips #1 screwdriver, remove the three gold 15.5 mm screws.

Using a Phillips #1 screwdriver, remove the three gold 15.5 mm screws.

Step 9

• Carefully remove the wheel.

Carefully remove the wheel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Vanessa Greyson                     

Member since: 02/02/2017

459 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 16-3, Blackwell Spring 2017                        

                                                  Member of USF Tampa, Team 16-3, Blackwell Spring 2017 



                    USFT-BLACKWELL-S17S16G3                     


                                            4 Members                     


                                            6 Guides authored