Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
1
- Side Brush Module
- 7 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackiRobot Roomba 890
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Side Brush Module
- Use a #2 Phillips screwdriver to remove the 7.7 mm screw securing the side brush head.
- Remove the yellow brush head.
Use a #2 Phillips screwdriver to remove the 7.7 mm screw securing the side brush head.
Remove the yellow brush head.
1024
Step 2
- Place the Roomba with its bottom facing toward you.
- Use a Phillips #2 screwdriver to remove the four 11 mm screws.
- Remove the battery cover.
Place the Roomba with its bottom facing toward you.
Use a Phillips #2 screwdriver to remove the four 11 mm screws.
Remove the battery cover.
Step 3
- Pull directly up on the grey pull tabs to remove the battery.
Pull directly up on the grey pull tabs to remove the battery.
Step 4
- Lift off the baseplate.
Lift off the baseplate.
Step 5
- Press the dustbin release button and pull it straight out.
Press the dustbin release button and pull it straight out.
Step 6
- On the underside of the Roomba, use a Phillips #1 screwdriver to remove the two 15.5 mm screws.
On the underside of the Roomba, use a Phillips #1 screwdriver to remove the two 15.5 mm screws.
Step 7
- Grip the side brush module casing and lift it out vertically, perpendicular to the Roomba.
Grip the side brush module casing and lift it out vertically, perpendicular to the Roomba.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Dustin Staples
Member since: 03/28/2022
339 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team 1-3, Petersen Spring 2022
Member of UMass Dartmouth, Team 1-3, Petersen Spring 2022
UMASSD-PETERSEN-S22S1G3
3 Members
6 Guides authored