Irobot Roomba 890 Cleaning Head Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 minutes            

Sections

1

• Cleaning Head
• 7 steps

Flags

0

• BackiRobot Roomba 890

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cleaning Head               

• Use a Phillips #2 screwdriver to remove the two 11 mm screws.
• Remove the battery cover.

Use a Phillips #2 screwdriver to remove the two 11 mm screws.

Remove the battery cover.

1024

Step 2

• Remove the battery by pulling directly up on the grey pull tabs.

Remove the battery by pulling directly up on the grey pull tabs.

Step 3

• Use a Phillips #2 screwdriver to remove the one 7.7 mm screw.
• Remove the yellow brush head.

Use a Phillips #2 screwdriver to remove the one 7.7 mm screw.

Remove the yellow brush head.

Step 4

• Use a Phillips #2 screwdriver to remove the two 11 mm screws.
• Lift the baseplate up and off.

Lift the baseplate up and off.

Step 5

• To remove the dust collection bin, press the release button on the top side of the Roomba and pull it straight out.

To remove the dust collection bin, press the release button on the top side of the Roomba and pull it straight out.

Step 6

• Press the bright yellow tabs inwards and lift up at the same time to expose the cleaning head.
• Remove the main brushes by lifting them up and out of the housing.

Press the bright yellow tabs inwards and lift up at the same time to expose the cleaning head.

Remove the main brushes by lifting them up and out of the housing.

Step 7

• Use a Phillips #2 screwdriver to remove the two 11 mm screws.
• Lift the cleaning head out of the Roomba.

Lift the cleaning head out of the Roomba.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Caeden Foxhoven                     

Member since: 03/28/2022

313 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team 1-3, Petersen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-3, Petersen Spring 2022 



                    UMASSD-PETERSEN-S22S1G3                     


                                            3 Members                     


                                            6 Guides authored