Difficulty
Easy
Steps
5
Time Required
4 - 7 minutes
Sections
2
- Battery
- 3 steps
- Side Wheels
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackiRobot Roomba 880
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Start with your Roomba upside down, with the wheels facing up.
- Using a JIS driver in #1 size remove the two 15mm screws holding the battery cover in place.
Start with your Roomba upside down, with the wheels facing up.
Using a JIS driver in #1 size remove the two 15mm screws holding the battery cover in place.
1024
Step 2
- Remove the battery cover and place it off to the side.
Remove the battery cover and place it off to the side.
Step 3
- Remove the battery using the green tabs on either side of the battery.
Remove the battery using the green tabs on either side of the battery.
Step 4
Side Wheels
- Loosen the side brush screw with a screwdriver.
- Remove the side brush
Loosen the side brush screw with a screwdriver.
Remove the side brush
Step 5
- Loosen the single screws that retains the side wheel to the Roomba.
- Remove cover over the wheel that was held in place by the screws.
- Remove the wheel module.
Loosen the single screws that retains the side wheel to the Roomba.
Remove cover over the wheel that was held in place by the screws.
Remove the wheel module.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Chase Oleson
Member since: 04/18/2017
125 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Cal Poly, Team S17-G4, Banghart Spring 2017
Member of Cal Poly, Team S17-G4, Banghart Spring 2017
CPSU-BANGHART-S17S17G4
5 Members
5 Guides authored
