Difficulty
Moderate
Steps
10
Time Required
10 minutes
Sections
1
- Side Brush Motor
- 10 steps
Flags
0
BackiRobot Roomba 880
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Side Brush Motor
- Remove the two Phillips #1 15mm screws holding the battery cover in place.
- Once unscrewed, remove the battery cover and set aside.
Remove the two Phillips #1 15mm screws holding the battery cover in place.
Once unscrewed, remove the battery cover and set aside.
1024
Step 2
- Remove two 15mm Phillips #1 screws beneath each side wheel.
Remove two 15mm Phillips #1 screws beneath each side wheel.
Step 3
- Remove the 10mm Phillips #1 screw holding the side brush in place.
- Once unscrewed, remove the side brush and set aside.
Remove the 10mm Phillips #1 screw holding the side brush in place.
Once unscrewed, remove the side brush and set aside.
Step 4
- Remove the outer covering.
Remove the outer covering.
Step 5
- Remove the three 10mm Phillips #1 screws holding down the side brush motor case.
Remove the three 10mm Phillips #1 screws holding down the side brush motor case.
Step 6
- Take out the side brush motor case.
Take out the side brush motor case.
Step 7
- Remove the 10mm Phillips #1 screw holding down the lid of the side brush motor case.
Remove the 10mm Phillips #1 screw holding down the lid of the side brush motor case.
Step 8
- Remove the piece holding the lid to the case.
- Take off the lid and set aside.
Remove the piece holding the lid to the case.
Take off the lid and set aside.
Step 9
- Remove the three 10mm Phillips #1 screws.
Remove the three 10mm Phillips #1 screws.
Step 10
- Flip over and remove the side brush motor.
- All done!
Flip over and remove the side brush motor.
All done!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
agriewe
Member since: 04/18/2017
155 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S17-G4, Banghart Spring 2017
Member of Cal Poly, Team S17-G4, Banghart Spring 2017
CPSU-BANGHART-S17S17G4
5 Members
5 Guides authored
