Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Filter
- 3 steps
Flags
0
BackiRobot Roomba 694
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
A dirty vacuum filter restricts airflow and reduces the performance of your Roomba vacuum. iRobot recommends cleaning the Roomba 694 filter at least once a week and replacing the filter every two months. This guide will show you how to clean and replace the filter on the Roomba 694.
Check to confirm the power is off before you begin.
Step 1
Filter
- Press the button on the face of the Roomba to release the bin. Pull out the bin.
Press the button on the face of the Roomba to release the bin. Pull out the bin.
1024
Step 2
- Empty out the bin.
Empty out the bin.
Step 3
- Remove the filter from the Roomba by sliding it out of the bin.
- If the filter is in good condition, you can clean it and reuse it. If it is damaged or unable to be cleaned sufficiently, replace the filter with a new one.
Remove the filter from the Roomba by sliding it out of the bin.
If the filter is in good condition, you can clean it and reuse it. If it is damaged or unable to be cleaned sufficiently, replace the filter with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Alexis Medeiros
Member since: 03/28/2022
193 Reputation
1 Guide authored
Badges:
3
Team
UMass Dartmouth, Team 2-5, Mellen Spring 2022
Member of UMass Dartmouth, Team 2-5, Mellen Spring 2022
UMASSD-MELLEN-S22S2G5
3 Members
3 Guides authored
