Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Side Brush and Back Panel
- 2 steps
Flags
0
BackiRobot Roomba 655 Pet Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing the Side Brush
- Flip the device over onto its back.
- Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.
- This screw doesn’t completely come out of the yellow side brush.
Flip the device over onto its back.
Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.
This screw doesn’t completely come out of the yellow side brush.
1024
Step 2
Removing the Back Panel
- Using a Phillips #1 screwdriver, remove the four screws on the back panel.
- Once the screws are loose gently pry the back plate away from the body by using the spudger tool.
- The screws don’t completely come out of the panel, but it will still come apart once unscrewed.
Using a Phillips #1 screwdriver, remove the four screws on the back panel.
Once the screws are loose gently pry the back plate away from the body by using the spudger tool.
The screws don’t completely come out of the panel, but it will still come apart once unscrewed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 10 other contributors
Matt Davis
Member since: 01/22/2015
1,583 Reputation
7 Guides authored
Badges:
19
+16 more badges
Team
Cal Poly, Team 21-20, Maness Winter 2015
Member of Cal Poly, Team 21-20, Maness Winter 2015
CPSU-MANESS-W15S21G20
4 Members
14 Guides authored
