Irobot Roomba 655 Pet Series Front Caster Wheel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Side Brush and Back Panel
2 steps
Front Caster Wheel
2 steps

Flags

BackiRobot Roomba 655 Pet Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing the Side Brush

Flip the device over onto its back.
Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.
This screw doesn’t completely come out of the yellow side brush.

Flip the device over onto its back.

Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.

This screw doesn’t completely come out of the yellow side brush.

1024

Step 2

              Removing the Back Panel

Using a Phillips #1 screwdriver, remove the four screws on the back panel.
Once the screws are loose gently pry the back plate away from the body by using the spudger tool.
The screws don’t completely come out of the panel, but it will still come apart once unscrewed.

Using a Phillips #1 screwdriver, remove the four screws on the back panel.

Once the screws are loose gently pry the back plate away from the body by using the spudger tool.

The screws don’t completely come out of the panel, but it will still come apart once unscrewed.

Step 3

              Removal of Caster Wheel Housing

Turn the Roomba upside down, so that the vacuum and wheels are facing the ceiling.
Hold the caster wheel housing steady and insert the plastic spudger under the wheel housing.
Apply some force to pry the caster wheel straight up out of the device, and remove the caster wheel housing from the Roomba.

Turn the Roomba upside down, so that the vacuum and wheels are facing the ceiling.

Hold the caster wheel housing steady and insert the plastic spudger under the wheel housing.

Apply some force to pry the caster wheel straight up out of the device, and remove the caster wheel housing from the Roomba.

Step 4

              Removing Wheel From Rotating Housing

Firmly hold the caster wheel housing, and remove the caster wheel from its setting.
Clean the caster wheel with soap and water.
Once the caster wheel is clean and thoroughly dried, repeat the process in reverse order to reinstall the caster wheel back to the Roomba.

Firmly hold the caster wheel housing, and remove the caster wheel from its setting.

Clean the caster wheel with soap and water.

Once the caster wheel is clean and thoroughly dried, repeat the process in reverse order to reinstall the caster wheel back to the Roomba.

To reassemble the robot, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 12 other contributors

                    Rhett

Member since: 01/22/2015

1,310 Reputation

                                      7 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges

Team

                       Cal Poly, Team 21-20, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 21-20, Maness Winter 2015 



                    CPSU-MANESS-W15S21G20                     


                                            4 Members                     


                                            14 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team