Irobot Roomba 650 Side Brush And Bottom Panel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Side Brush and Bottom Panel
2 steps

Flags

BackiRobot Roomba 650
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing the Side Brush

With the Roomba upside down and turned off, use the Phillip’s 02 screwdriver to remove the one 3.5 mm screw from the center of the side-brush.
Set the screw aside and pull the brush out.

With the Roomba upside down and turned off, use the Phillip’s 02 screwdriver to remove the one 3.5 mm screw from the center of the side-brush.

Set the screw aside and pull the brush out.

1024

Step 2

              Bottom Panel Removal

Unscrew the four screws that hold the bottom panel using the Phillips 02 screwdriver.
The screws will not come out of the bottom panel. They were designed to become loose but not be removed. This prevents you from losing them, and prevents the Roomba from sucking them up if they came out during cleaning.
Once you are sure that all the screws have been loosened as much as possible, then lift the bottom panel up off the Roomba.

Unscrew the four screws that hold the bottom panel using the Phillips 02 screwdriver.

The screws will not come out of the bottom panel. They were designed to become loose but not be removed. This prevents you from losing them, and prevents the Roomba from sucking them up if they came out during cleaning.

Once you are sure that all the screws have been loosened as much as possible, then lift the bottom panel up off the Roomba.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 6 other contributors

                    Charles Ward

Member since: 01/22/2015

960 Reputation

                                      3 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 19-7, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 19-7, Maness Winter 2015 



                    CPSU-MANESS-W15S19G7                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

Team#

#

Introduction

What you need

Team