Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Secondary Brush
- 2 steps
- Wheel Spring
- 4 steps
Flags
0
BackiRobot Roomba 595 Pet Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Secondary Brush
- Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
1024
Step 2
- Gently pull the brush up and remove it from the device.
Gently pull the brush up and remove it from the device.
Step 3
Wheel Spring
- Unscrew the four 10mm screws on the underside of the Roomba with a Phillips #1 screwdriver.
- Remove the Roomba’s external underside.
Unscrew the four 10mm screws on the underside of the Roomba with a Phillips #1 screwdriver.
Remove the Roomba’s external underside.
Step 4
- Remove the 15 mm screws with the Phillips #0 screwdriver bit.
Remove the 15 mm screws with the Phillips #0 screwdriver bit.
Step 5
- Once the screws have been taken care of, the wheel component (with the spring inside) can be removed from the main assembly.
Once the screws have been taken care of, the wheel component (with the spring inside) can be removed from the main assembly.
Step 6
- Remove the two 5mm screws in the component and gently twist the casing until the spring is exposed.
- Carefully remove the spring from the component assembly as shown
Remove the two 5mm screws in the component and gently twist the casing until the spring is exposed.
Carefully remove the spring from the component assembly as shown
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Dale Shirley-Potopsingh
Member since: 10/02/2017
434 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S10-G5, Thompson Fall 2017
Member of USF Tampa, Team S10-G5, Thompson Fall 2017
USFT-THOMPSON-F17S10G5
3 Members
5 Guides authored
Rebecca Hubber - Feb 3, 2018
Reply
My spring has fallen out and you don’t show where the spring attatches
emls23 - Mar 4, 2019
Reply
Where can I get a new spring, mine is missing on the left wheel
Kathryn Roberts - Dec 8, 2020
Reply
The bracket for the front (white and black) wheel broke. Where can I get a new one?