Irobot Roomba 595 Pet Series Side Brush Motor Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

2

• Secondary Brush
• 2 steps
• Side Brush Motor
• 3 steps

Flags

0

• BackiRobot Roomba 595 Pet Series

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Secondary Brush               

• Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.

Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.

1024

Step 2

• Gently pull the brush up and remove it from the device.

Gently pull the brush up and remove it from the device.

Step 3

              Side Brush Motor               

• Unscrew the four 10mm screws on the underside of the Roomba with a Phillips #1 screwdriver.
• Lift the external underside cover accordingly.

Unscrew the four 10mm screws on the underside of the Roomba with a Phillips #1 screwdriver.

Lift the external underside cover accordingly.

Step 4

• Use the Phillips #0 screwdriver bit to remove the three 15mm screws.

Use the Phillips #0 screwdriver bit to remove the three 15mm screws.

Step 5

• Remove the motor from the blue casing.

Remove the motor from the blue casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Dale Shirley-Potopsingh                     

Member since: 10/02/2017

434 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team S10-G5, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S10-G5, Thompson Fall 2017 



                    USFT-THOMPSON-F17S10G5                     


                                            3 Members                     


                                            5 Guides authored                     

Jose - Apr 18, 2022

Reply

I changed the motor and still does not work.

I changed the motor and still did not work.