Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
2
- Secondary Brush
- 2 steps
- Main Brush
- 3 steps
Flags
0
BackiRobot Roomba 595 Pet Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Secondary Brush
- Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
1024
Step 2
- Gently pull the brush up and remove it from the device.
Gently pull the brush up and remove it from the device.
Step 3
Main Brush
- Remove the four 10mm screws with a Phillips #1 screwdriver. Gently lift off the external covering for the Roomba’s underside.
Remove the four 10mm screws with a Phillips #1 screwdriver. Gently lift off the external covering for the Roomba’s underside.
Step 4
- Press lightly on the yellow tabs and lift the cage cover containing the brush.
Press lightly on the yellow tabs and lift the cage cover containing the brush.
Step 5
- Lift the brush from the right side and slide it from its container within the Roomba.
Lift the brush from the right side and slide it from its container within the Roomba.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Dale Shirley-Potopsingh
Member since: 10/02/2017
434 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S10-G5, Thompson Fall 2017
Member of USF Tampa, Team S10-G5, Thompson Fall 2017
USFT-THOMPSON-F17S10G5
3 Members
5 Guides authored